Commercial Epoxy Flooring in Miami Beach
Industrial-grade epoxy floors engineered for Miami Beach hotels, restaurants, retail spaces, and hospitality back-of-house operations. Chemical-resistant, slip-rated, and built to handle the punishing daily traffic, aggressive cleaning chemicals, and constant moisture that defines every commercial space on the island.
Why Commercial Spaces Fail Without Epoxy
Bare or sealed concrete in a Miami Beach restaurant, hotel kitchen, or retail back-of-house wears through within months. Grease infiltrates the slab, salt air corrodes rebar, daily mopping degrades surface sealers, and food-service chemical exposure breaks down anything that’s not engineered for industrial conditions.
The cost of replacing a failed commercial floor — including operational downtime — runs three to five times the cost of installing a proper epoxy system from the start. For a hotel kitchen pulling 24-hour service or a restaurant doing $50K+ days, every hour the kitchen is closed for re-flooring is real revenue lost.
Built for Miami Beach Commerce
343 Epoxy installs commercial-grade epoxy systems engineered specifically for Miami Beach’s hospitality and retail environments. Our crews work in active hotel kitchens, restaurant back-of-house, retail showrooms, parking structures, and high-rise condo amenity spaces — coordinating with operations management on phasing, off-hours scheduling, and minimal-disruption installation.
Every system spec is matched to the operational demands of the space. A boutique retail showroom needs a different finish than a 24-hour hotel kitchen. A South Beach restaurant kitchen with thermal-shock from steam tables and walk-in coolers requires urethane cement, not standard epoxy. We diagnose the right system before quoting — not after the floor fails.
Whether you are running a property management operation, opening a new restaurant on Lincoln Road, or upgrading the kitchen of a Mid-Beach hotel, the floor is the foundation everything else sits on. Get it right the first time.
Engineered for Hospitality Demands
Health Code Compliant
USDA, FDA, and Florida health code-compliant systems for kitchens and food service. Slip-rated, seamless, and easy to sanitize — exactly what every annual inspection requires.
Off-Hours Scheduling
We work overnight, in phases, or during low-occupancy windows so your operation stays open. We’ve installed during full-service hotel kitchens — without shutting them down.
Premium Materials
ChemTek, Smith’s Paints, and Floor Guard products spec’d for commercial. No box-store kits, no generic primers — the same materials used in Class A commercial buildings.
Insurance & COIs
Full general liability, workers’ comp, and certificates of insurance provided to property management and HOAs before mobilization. We work the way real commercial contractors work.
How We Install Commercial Floors
Commercial epoxy installations on Miami Beach typically run two to five days depending on square footage, system spec, and operational phasing requirements.
Site Walk & Spec
Walk the space, identify operational constraints, recommend the right system spec for the application, provide a detailed scope and project schedule. COIs delivered up front.
Surface Prep
Diamond-grind to CSP-3 profile, route and fill cracks, moisture-test, repair damaged concrete. Commercial spec demands deeper prep than residential — we do not skip it.
Base & Build Coats
High-build epoxy or urethane base layer, broadcast aggregate for slip resistance where required, intermediate build coats for thickness and chemical resistance.
Topcoat & Reopen
UV-stable, chemical-resistant topcoat seals the system. Final inspection, walkthrough with operations team, warranty handoff. Typical reopening 24-72 hours after final coat.
Commercial Epoxy Across Miami Beach
Commercial flooring demand on Miami Beach is concentrated in five property types. Each one has unique operational constraints and unique system requirements.
Hotel Kitchens & Back-of-House
From the boutique hotels along Collins Avenue to the major properties in the Faena District, hotel kitchens face thermal shock from steam tables and walk-in coolers, daily aggressive sanitation, grease, and the constant moisture that comes with high-volume food service. We install urethane cement and high-build epoxy systems engineered for exactly these conditions — slip-rated, seamless, and resistant to the cleaning chemicals that destroy ordinary floors.
Restaurants & Hospitality Front-of-House
South Beach, Lincoln Road, Sunset Harbour — Miami Beach’s restaurant scene runs at a volume that defines hospitality flooring requirements. Front-of-house spaces need finishes that hold up to constant traffic while supporting the brand’s design language. We install metallic epoxy, decorative chip, and polished concrete systems that double as design elements while delivering commercial durability.
Retail & Showroom Floors
From Lincoln Road’s flagship retail to Sunset Harbour’s boutique showrooms, retail spaces on Miami Beach need floors that elevate the merchandise without becoming a maintenance burden. High-build epoxy and decorative coatings provide a clean, premium aesthetic with the durability to handle high foot traffic, store fixtures, and the daily logistics of inventory movement.
Parking Structures & Garages
Miami Beach high-rise condo and hotel parking structures face direct salt air, vehicle fluid drips, weather exposure on lower decks, and the structural concerns that come with aging concrete. We install vehicle-rated epoxy and urethane systems with line striping, slip texture in ramp areas, and waterproofing membranes for parking decks above habitable space.
Hospital, Medical & Spa Spaces
Miami Beach’s medical practices, dermatology offices, dental clinics, and spa businesses all need seamless, easy-to-sanitize floor systems that meet the cleanliness standards their professions require. Our antimicrobial epoxy systems with integral cove base detailing meet healthcare facility standards while looking polished enough for the front-of-house experience.
Commercial Epoxy Systems We Install
The right commercial epoxy system depends entirely on what the space is being used for. Here are the systems we install most often on Miami Beach commercial projects.
- Urethane Cement (Polyurethane Concrete): The toughest system we install. Thermal-shock resistant, chemical-resistant, slip-rated. Standard spec for hotel kitchens, restaurant back-of-house, food production, and any space that sees steam, hot water, and aggressive sanitation. 15-25 year lifespan in commercial conditions.
- Quartz Broadcast Epoxy: Decorative quartz aggregate broadcast into a high-build epoxy base. Slip-resistant by design, chemical-resistant, easy to clean. Common for medical offices, salons, retail back-of-house, and commercial bathrooms. Available in custom color blends to match brand standards.
- High-Build Solid Color Epoxy: Multi-coat, uniform-color industrial epoxy for warehouses, storage, parking, and back-of-house service areas. The workhorse spec — durable, simple, cost-effective.
- Metallic & Decorative Epoxy: Front-of-house and showroom applications where the floor is a design element. Custom color blends, marbleized patterns, hand-applied effects. Premium aesthetic at a fraction of the cost of natural stone.
- Polished Concrete with Densifier & Guard: The exposed-concrete look popular in modern restaurants and retail. Mechanically polished, densified, and sealed with a guard layer for stain resistance. Lower lifecycle cost than coating systems for the right space.
During the on-site walk, we recommend the right system for the operational profile. We don’t sell up to a premium spec when a workhorse system is the right call — and we don’t undersell when the space genuinely needs the premium product.
Commercial Epoxy Cost in Miami Beach
Commercial epoxy costs on Miami Beach run roughly $5-$18 per square foot installed depending on system spec, surface condition, square footage, and operational constraints. High-build solid-color epoxy on a large warehouse or storage area sits at the lower end. Urethane cement on a hospitality kitchen with full prep, integral cove base, and operational phasing sits at the upper end. Decorative metallic and quartz systems in showrooms and customer-facing areas sit in the middle.
The biggest cost variables on Miami Beach commercial projects are operational constraints and surface condition. A hotel kitchen that must stay open during installation requires phasing, overnight work, or rolling shutdowns of cooking lines — labor cost goes up. A 30-year-old commercial slab with severe spalling and moisture issues requires significantly more prep work than fresh concrete. Both factors get scoped and priced explicitly during the estimate so you understand exactly what’s driving the per-square-foot number.
For multi-property hotel groups, restaurant ownership groups, or property managers handling a portfolio of Miami Beach commercial spaces, we offer multi-property pricing and standardized system specs across locations. Reach out to discuss volume work — we have the crew capacity to handle multiple commercial projects in parallel.
Miami Beach Commercial Questions
What property managers, GMs, and owner-operators ask before booking a commercial epoxy install.
Ready for a
Commercial Floor That Lasts?
Call 343 Epoxy for a free on-site walk-through anywhere on Miami Beach. Same crew, same materials, full insurance, 5-year warranty. See our portfolio for completed Miami Beach commercial projects.