Skip to content
Coconut Creek, Florida

Epoxy Flooring in Coconut Creek

Coconut Creek runs on planned communities, Wynmoor, Township, Winston Park, Centura Parc, and the businesses along Lyons Road and MainStreet that serve them. 343 Epoxy coats the garages, lanais, pool decks, and commercial floors that come with that kind of city: HOA-approved, slip-rated, and built to outlast a Broward summer.

Black, purple and white metallic epoxy floor in a black-walled room
City Character

A City Built Around Communities

Coconut Creek calls itself the Butterfly Capital of the World, but what defines it for a flooring contractor is how much of the city sits inside a planned community. Wynmoor alone is one of the largest 55-and-over communities in Broward, and Township, Winston Park, Regency Lakes, and Centura Parc each come with their own architectural rules and their own expectations about how a contractor shows up.

That changes the work. A garage coating in Coconut Creek is rarely just a coating, it comes with an HOA color submission, whatever paperwork the association asks for, and quiet hours the crew has to respect. We sort that out with you before the grinder comes off the truck, so your floor gets installed without a stop-work notice taped to the door. Carriage-style single garages, attached two-car garages, and screened lanais all get the same prep.

On the commercial side, the Lyons Road and Hillsboro Boulevard corridors and the MainStreet at Coconut Creek district are full of retail, office, and food-service floors. For any kitchen or wet area we steer owners toward urethane cement, the one system that shrugs off steam cleaning and constant moisture. Same coatings, same prep we use in Miami.

Areas We Serve

From Wynmoor Garages to MainStreet Kitchens

Wynmoor & 55+ Communities

Wynmoor, Township, and the active-adult neighborhoods off Lyons Road. Single-car carriage garages, screened lanais, and patios, coated in HOA-approved colors with the documentation the association asks for.

Winston Park & Regency Lakes

The family neighborhoods on the north and west sides. Two-car garages, pool decks, and outdoor living spaces. Flake is a good fit for these lakeside homes that need a tough, low-maintenance surface.

Lyons Road Corridor

Coconut Creek’s commercial spine, retail centers, medical and professional offices, and light-industrial flex space between Sample Road and Hillsboro Boulevard. We schedule commercial installs after hours so your doors stay open.

MainStreet & the Promenade

The MainStreet at Coconut Creek district and the dining and entertainment tenants nearby. Restaurant kitchens, breweries, and retail buildouts, urethane cement for wet kitchens, decorative flake and metallic for the front of house.

What We Install

Pick the System by What the Floor Does

Every system below is available throughout Coconut Creek and across Broward County. Pick by use case. We’ll confirm the right spec at the on-site visit.

Garage & Flake Epoxy

The Coconut Creek default. Decorative chip blends over a 100% solids epoxy base, sealed with an aliphatic urethane topcoat that handles hot tires and Florida heat. In a community with color rules, the chip blend goes through the HOA first and arrives on install day already approved. Most garage floors take one to two days, depending on the system and what the slab needs.

Pool Deck & Patio

Textured, slip-rated coatings for the lanais and pool decks across Coconut Creek’s lakeside communities. Stays cooler underfoot than bare concrete and grippy when wet, built for sun-exposed, splash-zone surfaces.

Metallic Epoxy

Premium decorative finish for showrooms, collector-car bays, and high-end garages. Where an association reviews anything you can see from the street, metallic usually goes inside: a hobby garage, a home gym, a storefront. We leave samples with you for the HOA submission if one is needed.

Commercial · Quartz · Urethane

Coconut Creek commercial floors get spec’d coatings: high-build commercial epoxy for retail and offices, broadcast quartz for slip-rated kitchens and labs, urethane cement for any floor that gets steam-cleaned daily.

FAQs

What the Creek Asks Before We Grind

What Coconut Creek homeowners, community residents, and Lyons Road business owners ask us most.

01Do you coat garage floors in Coconut Creek’s gated and 55+ communities?
Yes. Wynmoor, Township, Winston Park, and Centura Parc each have their own rules, and we work inside them: approved color submissions, whatever documentation the association asks for, and work-hour compliance, so your floor gets done without a violation notice. Single-car carriage garages and attached two-car garages get the same grind and the same system.
02How long does a garage epoxy floor take in Coconut Creek?
Most garage floors take one to two days, depending on the system and what the slab needs. Cure timing depends on slab moisture and the system you pick (flake, metallic, or polyaspartic). We schedule around Coconut Creek’s afternoon storms so the coating goes down dry and cures correctly.
03Will an epoxy floor survive Coconut Creek’s heat and humidity?
Yes. We install 100% solids epoxy bases with aliphatic urethane topcoats rated for Miami year-round. They resist hot-tire pickup, UV yellowing, and the soft, tacky failure that hardware-store kits suffer in a Broward summer. For garages without air conditioning we factor slab surface temperature into the install schedule.
04Do you handle commercial floors along Lyons Road and at MainStreet?
Yes. Retail, office, and light-industrial floors along Lyons Road, Hillsboro Boulevard, and the MainStreet at Coconut Creek district are work we take on. For restaurants and food-service tenants we recommend urethane cement, which handles steam cleaning and constant moisture. Commercial installs can run after hours or over a weekend so you stay open.
05Can you refinish a patio or pool deck in Coconut Creek?
Yes. Screened lanais, open patios, and pool decks around Coconut Creek’s lakeside communities take a beating from sun and water. We use textured, slip-rated pool deck coatings designed for wet, sun-exposed concrete so the surface stays cool underfoot and grippy around the water.
06What does an epoxy floor cost in Coconut Creek?
It depends on square footage, the system, and slab condition. A flake garage, a metallic floor, and a polyaspartic patio each price differently, and slip texture and prep change the number. Every quote is on-site and in writing. No over-the-phone guessing. Send us your slab photos or call (305) 409-9022.
Reviews

Straight Off Our Google Reviews

“Unbelievable work. Got my garage floor done by Zach from 343 epoxy. Him and his whole team were very professional and punctual. They helped bring my vision to life.”
bryan armas, Google review
“I couldn’t be happier with the epoxy work done on my terrace! They absolutely killed it from start to finish. … Highly recommend them if you want beautiful, clean, detailed work done right!”
Michelle Findeisen, Google review
“The process to have my garage updated for the new century was amazing, Zach and team since day 1 were active and present, offer not only a quote but a process that allows us to take good decisions. From the storage of my garage stuff, through the decision of the colors and lines, everything was honest, clear and professional.”
Ghassan Dreibi, Google review
Book Your Visit

Book a Walk-Through Before the HOA Meeting

We come out anywhere in Coconut Creek, look at the garage, patio, pool deck, or commercial floor, and put the number in writing. Premium materials, and a 5-year warranty on materials and installation. Contact us, browse the project gallery, or see what we cover across Broward County.

Call the Crew