Miami’s Cleanroom Epoxy Flooring
343 Epoxy installs epoxy flooring systems for cleanrooms across Miami and Miami. Built for esd-safe, particle-free floor coatings for controlled environments.
Built for Cleanroom Demands
Seamless Surface
No grout lines or surface seams, cleanrooms stay cleaner and maintain better hygiene.
Chemical Resistant
Withstands the cleaning agents and chemicals specific to your operation.
Durable Finish
Handles the daily foot traffic, equipment loads, and wear patterns of your space.
Custom Aesthetic
Solid colors, metallic, or broadcast flake to match your brand and environment.
Our Cleanroom Installation Process
Site Walk
We visit the space, evaluate the slab, and understand the operational constraints before writing a spec.
Written Proposal
You receive a coating system recommendation, product data, timeline, and fixed price.
Surface Prep
Diamond grinding or shot blasting opens the slab profile for maximum adhesion; repairs made.
Coat and Cure
Base and topcoat applied on schedule; back to service in 24 hours for foot traffic.
Why Cleanrooms in Miami Choose Epoxy Flooring
Miami cleanrooms deal with a combination of heat, humidity, and heavy use that accelerates floor deterioration. Bare or painted concrete absorbs spills, harbors bacteria in surface pores, and becomes slippery under wet conditions. A seamless epoxy system eliminates these failure modes and gives cleanrooms a surface that handles the specific demands of the space, whether that’s chemical resistance, impact loading, or client-facing aesthetics. Contact us or call (305) 409-9022.
Coating System Selection for Cleanrooms
Not all epoxy systems are appropriate for cleanrooms. The right system depends on chemical exposure, mechanical loads, moisture conditions, and aesthetic requirements. 343 Epoxy walks each space before writing a spec, we don’t apply a generic system to a unique environment. A site consultation is free and takes less than an hour. Contact us or call (305) 409-9022.
Miami Climate Considerations
High humidity and year-round heat in Miami and Miami create vapor drive through concrete slabs that can cause coating failure if not addressed. We test moisture levels before every installation and specify moisture-mitigating primers where needed. UV-stable topcoats prevent yellowing in spaces with natural light exposure. Contact us or call (305) 409-9022.
Cleaning and Maintenance Protocol
Maintaining a 343 Epoxy floor in a cleanroom requires only a neutral-pH cleaner and a regular mop. Chemical spills clean up immediately without staining. No waxing, stripping, or buffing is needed between professional re-coats. Most cleanrooms find the time savings from reduced floor maintenance pays for the installation within the first year. Contact us or call (305) 409-9022.
343 Epoxy for Miami Cleanrooms
343 Epoxy has installed floors in cleanrooms across Miami-Dade, Broward, and Palm Beach counties. We work within your schedule, provide a written spec and fixed price, and back every installation with a workmanship warranty. Call (305) 409-9022 or contact us online for a free consultation. Contact us or call (305) 409-9022.
Planning the Install Around Your Operation
Cleanroom flooring is specified to a classification, so the conversation starts with which one you hold. The requirement is a monolithic, non-shedding surface with coved corners and no joint anywhere for particulate to collect, and the coating has to tolerate the disinfectant regime actually used on it rather than a generic one. Static control is a separate decision layered on top: conductive or dissipative systems need a grounded primer and a documented resistance test after install. We provide that test data with handover, since it is usually required for your own certification rather than optional.
Keeping the Floor Right After We Leave
Cleanroom floors are maintained to your protocol rather than ours, but two things are worth flagging. First, keep a record of the disinfectants in use, because a change in chemistry is the most common reason a compliant floor starts to break down. Second, re-test static resistance on the schedule your certification requires rather than only when something looks wrong, since dissipative performance drifts before it visibly fails. Coving and penetrations are the areas to inspect: those are where a monolithic floor stops being monolithic if anything has been drilled or altered since install.
Cleanroom Epoxy Questions Answered
What Miami, FL cleanrooms ask us most about floor systems.
What coating system is right for a cleanroom?
How long does installation take?
Can you work around our operating hours?
How do I clean and maintain the floor?
How long does the floor last?
Do you offer a warranty?
Trusted by Miami Cleanrooms
“The floor completely changed how the cleanroom looks and performs. We get compliments from clients regularly.”
“343 Epoxy showed up on time, hit the schedule, and delivered exactly what was on the proposal.”
“The cleanup time we save every week adds up. The floor is the best operational decision we made this year.”
Ready to Floor Your Cleanroom?
Free consultation for cleanrooms across Miami, Fort Lauderdale, and Miami.