Skip to content

Miami’s Physical Therapy Clinic Epoxy Flooring

A therapy floor has a tricky job. It has to grip a patient’s shuffling foot and still let a wheelchair, a walker and a rolling stool move without a fight. Add rubber-footed equipment, a wipe-down after every patient and people who are nervous about falling, and the floor matters more than most owners think.

Treatment Floor

Grip for the Feet, Easy on the Wheels

Gait Training

Patients shuffle, drag a foot and stop short. The floor needs steady grip in every direction and no shine that reads as a wet spot.

Walkers and Wheelchairs

Walker glides and small chair casters fight heavy texture. A fine grit gives traction without making every push work.

Rubber Equipment

Rubber feet on racks, tables and bikes can mark a floor over time. We plan where rubber sits before we pick a topcoat.

Between Patients

Disinfectant sprays and wipes after every session. Residue builds up and turns slick unless it gets rinsed.

Around Your Schedule

Scheduling Around Your Patient Book

01

Walk the Gym

We walk the treatment floor with your clinic director and mark where gait work happens, where tables and mats sit and what equipment stays.

02

Push a Sample

We make a sample board with the texture we’re proposing. Push a wheelchair and a walker across it and stand on it before you decide.

03

Test and Grind

The slab gets a moisture test, then diamond grinding with vacuum collection, crack repair and old adhesive removal.

04

Coat on Closed Days

We coat over the days you block off the schedule, then give you walk-on and equipment return times in writing.

A Floor for People Relearning to Walk

Your patients aren’t walking the way they used to, and some of them are scared of the floor. Someone coming back from a knee replacement or a stroke drags a foot, takes short steps and stops suddenly. A floor that grips evenly in every direction gives them one less thing to worry about. A floor that shines can do the opposite. Bright reflections from windows and overhead lights can look like a wet spot to an older patient, and they’ll slow down or try to step around it.

That’s why we steer therapy clinics toward a satin or matte topcoat over high gloss, and toward calm, even colors over busy patterns. A solid color or a light flake lets a patient read the floor clearly. The rules your clinic follows for patient safety still govern. We build the floor to support them.

Texture That Grips Without Dragging a Wheel

Slip resistance and easy rolling pull against each other. More texture means more grip for a foot and more drag for a wheel. Heavy aggregate will stop a sliding shoe, and it will also catch walker glides, make wheelchairs work harder and hold dirt a mop can’t reach. Too smooth, and a damp shoe or a sock slides.

For most therapy floors we broadcast a fine aggregate into the topcoat. It gives a shoe something to bite, lets casters roll and still cleans with a mop. We can zone it, too: a bit more grip at the entry and by the restrooms, and the lightest texture in the lanes where wheelchairs and walkers do their work. The sample board settles it. Your therapists push the equipment they actually use across it and tell us what feels right.

Rubber Mats, Weight Racks and Treadmills

Most clinics keep a strength corner: dumbbells, a cable machine, a couple of treadmills and bikes, mats on the floor. A dropped dumbbell can chip any coating, so the free-weight area is usually better off on rubber flooring, and we coat the rest of the gym around it. Treadmills and bikes sit fine on a coated floor with their own equipment mats under them.

Rubber needs some thought. Rubber feet on racks and tables, and rubber mats left in one place for months, can leave marks or discolor some topcoats, especially in a warm room. We ask what’s going to sit where, pick a topcoat that holds up to it, and point out the spots worth a protective pad. For a full workout floor, our gym floor page covers the heavier side.

Lane Lines, Glare and an Honest Word on Echo

Gait lanes and distance marks usually go down as floor tape, and floor tape peels, collects dirt at the edges and gets scraped up by the cleaning crew. We can lay lines and marks into the coating itself, under the clear topcoat, so they stay put and mop clean. Tell us where your therapists run walking drills and how they mark distance, and we’ll lay it out with them before the topcoat goes down.

An honest word on noise: a coating doesn’t absorb sound. If your gym echoes, that’s the hard ceiling and bare walls, and a coated floor won’t fix it. Wheels on a fine texture make a little more noise than wheels on smooth vinyl. What we can control is glare, which is why the satin finish matters more in a therapy gym than in most rooms we coat.

Spray Bottles, Residue and the Warranty

Your staff wipes down tables and equipment after every patient, and the overspray lands on the floor. Most clinic disinfectants are fine on a good topcoat, but some leave a film, and film on a coated floor gets slick. Mop with a neutral cleaner, rinse with plain water at the end of the day, and send us the products you use so we can check them against the topcoat’s chemical resistance data before we recommend one.

Every slab gets a vapor test before we coat, because Miami concrete holds a lot of water, and a moisture-mitigating primer goes down where the readings call for it. Every floor carries a 5-year warranty on materials and installation, in writing. 343 Epoxy is owned by Zach, a firefighter, and works across Miami-Dade, Broward, Palm Beach and the Florida Keys. For exam rooms and front desks, see our medical office page. Call (305) 409-9022, or (305) 310-2827 en espaƱol.

Clinic Questions

Therapy Floor Questions

What clinic owners and therapists ask before they book the floor.

Will a coated floor be slippery for patients?
Not with the right texture. We broadcast a fine aggregate into the topcoat and use a satin finish, and we zone a bit more grip at the entry and by the restrooms.
Will walkers and wheelchairs roll easily?
Yes, at the fine texture we use in gait lanes. We make a sample board first so your therapists can push their own equipment across it.
Can rubber equipment feet stain the floor?
Some rubber can mark or discolor a topcoat over time, especially mats left in one spot. We plan where rubber sits and choose a topcoat for it.
Can you put gait lines and distance marks in the floor?
Yes. We lay them into the coating under the clear topcoat, so they don’t peel like tape and they mop clean.
Should the free-weight area be coated?
Usually it is better on rubber flooring, because a dropped dumbbell can chip any coating. We coat the rest of the gym around it.
Which disinfectants are safe on the floor?
Send us the products you use and we will check them against the topcoat’s chemical resistance data. Rinse anything that leaves a film, because film turns slick.
What does the warranty cover?
Five years on materials and installation, with the terms in writing.
Reviews

Customers on the Record

“Zach is a professional in all sense of the word. Amazing customer service. He explain everything was very communicative and the job got done super fast. The end result in our garage was 11 out of 10. Would recommend 343 epoxy 1000%.”
SCC Unlimited LLC, Google review
“343 is by far one of the best in the business. Knowledgeable, pristine and flawless work. Professional, punctual, and the results back what they promote.”
Lyza Sanchez, Google review
Clinic Owners

Push a Wheelchair Across a Sample

Before you commit, we’ll bring a texture sample to your clinic, walk the gym with your director and plan the work around the days you can block off.